Description

John Deere Backhoe K & L Series LOWER Front Windshield, Left Hand or Right Hand.

Compatible with models 310K (EP, SK, TC), 315K, 410K (TC), 710K, 210K (EP), 310L (EP, SL, HL), 315SL & 410L – offered in 1/4″, 3/8″ & 1/2″ CLEAR POLYCARBONATE – SUPERCOAT™ BOTH SIDES.

Why replace factory glass or other plastic windows with a SHIELDS® Windshield?

With a SHIELDS® WINDSHIELD you get the FORM ~ FIT ~ FUNCTION of OEM glass with the Increased Safety ~ Durability ~ Performance of Formed & Coated Polycarbonate. To begin, we cut and form our windows using an exclusive polycarbonate sheet. We duplicate the OEM glass (including hardware mounting holes). Then we mill the edges (as needed) and holes so that the original hardware can be used from your existing glass application no matter what thickness you need (1/4”, 3/8” or 1/2”).

Finally, we post-coat in-house with our proprietary SUPERCOAT™. This gives the polycarbonate nearly the same level of abrasion resistance as glass. With our coating, you can still use your windshield wipers and have worry-free cleaning! Our coating also prevents UV damage and hazing.

Advantages of SHIELDS® vs Glass and other plastic windows:

• 260x++ TIMES STRONGER
• 1/2 THE WEIGHT
• OPTICALLY CORRECT
• DROP-IN REPLACEMENT – No extra hardware needed!
• ABRASION-RESISTANT – Still use your wipers!
• INCREASED LIGHT TRANSMITTANCE
• DECREASED SUMMER HEAT GAIN
• DECREASED WINTER HEAT LOSS
• REDUCED NOISE

Many people refer to polycarbonate as Lexan™ and Makrolon® which are brand names of polycarbonate, or plexiglass which is acrylic. Others may refer to polycarbonate as, safety glass, demo door, and other forms of glass.

Education is key when shopping for polycarbonate windshields. To learn more about polycarbonate and what thickness you should buy, check out our blog below!

Why replace factory glass with a SHIELDS® SUPERCOATED™ Polycarbonate Window? The FORM ~ FIT ~ FUNCTION of OEM Glass Combined with the Increased Safety ~ Durability ~ Performance of Formed & Coated Polycarbonate. Our windows are cut and formed to duplicate the OEM glass shape and trim (including hardware mounting holes). Edges and holes are milled (as needed) so that original gaskets and hardware can be used from your existing glass application. Our windows are post-coated with our SUPERCOAT™ giving the polycarbonate nearly the same level of abrasion resistance of glass AND these Performance Advantages: * 1/2 THE WEIGHT * 250 TIMES STRONGER * REDUCED NOISE * INCREASED LIGHT TRANSMITTANCE * DECREASED SUMMER HEAT GAIN * DECREASED WINTER HEAT LOSS. Replacement polycarbonate is commonly referred to as Lexan, Makrolon, or PC and mistakenly referred to as glass, plexiglass, and plastic. Plexiglass and plastic are acrylics which is a different material than polycarbonate. John Deere is a Registered Trademark of Deere & Company.